Home

Contact Us

Email: superlumination@cox.net

Search

 



MENU HERE

Indicator Lights


Motorcycle Led Turn Signal Indicator Running Lights

Motorcycle Led Indicator Turn Signal Running Light Bullet Connectors Bullet Connectors
See Description Below for Dimensions Single Circuit Wiring Dual Circuit Wiring

Motorcycle Led Indicator Turn Signal Running Light Cool Super White SMT Motorcycle Led Indicator Turn Signal Running Brake Light Red Motorcycle Led Indicator Turn Signal Blinker Running Light Amber Yellow
Cool White Red Amber
Black Plastic
Dimensions: A=148mm B=44mm C=55mm D=14mm E=10mm F=53mm
8SMT Led With Optical Lens- Single Circuit

 $11.99 Each

Choose Color

 

Choose Type

 


Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light
Cool White Red Amber
Black Plastic
Dimensions: A=83mm B=28mm C=20mm D=17mm E=10mm F=30mm
15 Led - Single Circuit

 $8.99 Each

Choose Color

 

Choose Type

 


Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light
Gray Metallic Zinc - Aluminum Alloy Black Metallic Zinc - Aluminum Alloy Chrome Plated Metallic  Zinc - Aluminum Alloy
Red Amber Red Amber Red Amber
Dimensions: A=86mm B=41mm C=23mm D=17mm E=10mm F=28mm

18 Led - Dual Circuit

 (**Note: Dim Circuit Requires 13+ Volts to Light)

 $19.99 Each

Choose Color

 

Choose Type

 


Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light
Chrome Plated Plastic
Red Amber
Dimensions: A=143mm B=42mm C=34mm D=20mm E=10mm F=36mm

44 Led - Dual Circuit

 (**Note: Dim Circuit Requires 13+ Volts to Light)

 $24.99 Each

Choose Color

 

Choose Type

 


Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light
Gray Metallic Zinc - Aluminum Alloy Black Metallic Zinc - Aluminum Alloy
Red Amber Red Amber
Dimensions: A=90mm B=22mm C=17mm D=20mm E=10mm F=23mm

13 Led - Dual Circuit

 (**Note: Dim Circuit Requires 13+ Volts to Light)

 $12.99 Each

Choose Color

 

Choose Type

 


Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light
Gray Plastic (Short Neck) Black Plastic (Short Neck) Chrome Plastic (Short Neck) Graphite Plastic (Short Neck)
Dimensions: A=82mm B=27mm C=22mm D=16mm E=10mm F=29mm (Short Neck)
    Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light     Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light
    Black Plastic (Long Neck)     Graphite Plastic (Long Neck)
Dimensions: A=103mm B=27mm C=41mm D=16mm E=10mm F=29mm (Long Neck)
Red Amber Red Amber Red Amber Red Amber

14 Led (13+ 1 Tip Mounted Led)- Dual Circuit

 (**Note: Dim Circuit Requires 13+ Volts to Light)

 $10.99 Each

Choose Color

 

Choose Type

 


Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light
Black Plastic (Short Neck) Chrome Plastic (Short Neck) Graphite Plastic (Short Neck)
Dimensions: A=84mm B=37mm C=20mm D=17mm E=10mm F=30mm
Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light
Black Plastic (Long Neck) Chrome Plastic (Long Neck) Graphite Plastic (Long Neck)
Dimensions: A=105mm B=37mm C=40mm D=17mm E=10mm F=30mm
Red Amber Red Amber Red Amber

18 Led - Dual Circuit

 (**Note: Dim Circuit Requires 13+ Volts to Light)

 $12.99 Each

Choose Color

 

Choose Type

 


Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light
Red Amber
Graphite Plastic
Dimensions: A=83mm B=28mm C=20mm D=17mm E=10mm F=30mm
15 Led - Dual Circuit

 (**Note: Dim Circuit Requires 13+ Volts to Light)

 $9.99 Each

Choose Color

 

Choose Type

 


Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light
Black Plastic (Short Neck) Graphite Plastic (Short Neck) Black Plastic (Long Neck) Graphite Plastic (Long Neck)
Dimensions: A=82mm B=27mm C=22mm D=16mm E=10mm F=29mm (Short Neck) Dimensions: A=103mm B=27mm C=41mm D=16mm E=10mm F=29mm (Long Neck)
Amber

Halogen - Single Circuit

 $5.99 Each

Choose Color

 

Choose Type

 


Harley Davidson Style  - Heavy Chrome Metallic - Bullet Style - Led Turn Signal Indicator Running Lights

 

Harley Davidson Motorcycle Led Indicator Turn Signal Running Light Harley Davidson Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light Motorcycle Led Indicator Turn Signal Running Light
2- Screw Hole Mount Tube Mount (40mm)
Light Dimension: 60mm diameter Light Dimension: 60mm diameter
Red Amber Red Amber

20 Led - Dual Circuit

 (**Note: Dim Circuit Requires 13+ Volts to Light)

 $19.99 Each

Choose Color

 

Choose Type

 



 LED Wheel Lights
Metal Base - Screws onto any Valve Stem
Automatic Switch turn on when wheels are rolling and off when stopped
Bicycles, Motorcycles, Cars & Trucks
LED Tire Wheel Light Metal Valve Stem  LED Tire Wheel Light Metal Valve Stem
  • LED Color : Red, White, Blue or Green
  • Material: Metal Alloy & Plastic
  • Total Length: Approximately 6.50cm
  • Ring Diameter: Approximately 2.00cm (2.54cm=1.00inch)
  • The light will automatically shut off when the vehicle stops and come on when the wheel rolls.
    Metal Base screws onto any valve stem.
    Use on Bicycles, Motorcycles, Cars or Trucks.
  • Powered by:3*AG10 cell batteries(included)
Super White Blue Red Amber Green
$3.99 Each  

Choose Color  

Choose Type  


With 9 SMT Leds 12 Volt Stainless Steel Led Accent Lights

    All Stainless Steel Housing with 3 Independently Adjustable Rotating Mounting Brackets.  Rotate Each Bracket to Any Angle.

    Fully Waterproof.

    4" dual wire leads allow lights to be easily strung together.

    4" Dual Leads can be Lengthened as needed using the bullet style connectors (sold below).

    Draws only 30 milliamps of power.

    Great for underbody and indoor - outdoor use.

    Beautiful vivid colors never fade.

    These lights stay cool to the touch and produce no heat.

    Cool White Warm White Blue Red Amber Green

     $9.99 Each

    Choose Color

     

    Choose Type

     


 12 Volt

Stainless Steel Led Accent Lights

  • All Stainless Steel Housing with 3 Independently Adjustable Rotating Mounting Brackets.  Rotate Each Bracket to Any Angle.
  • Fully Waterproof
  • 4" dual wire leads allow lights to be easily strung together
  • 4" Dual Leads can be Lengthened as needed using the bullet style connectors (sold below)
  • Draws only 20 milliamps of power
  • Great for underbody and indoor - outdoor use

Beautiful vivid colors never fade.

These lights stay cool to the touch and produce no heat.

Cool White

Warm White

Blue

Red

 $6.99 Each

Choose Color

 

Choose Type

 


 12 Volt

Stainless Steel Led Accent Lights

  • All Stainless Steel Housing For Thru Hole Mounting in a 16mm diameter (5/8" diameter hole).
  • Fully Waterproof
  • 4" dual wire leads allow lights to be easily strung together
  • 4" Dual Leads can be Lengthened as needed using the bullet style connectors (sold below)
  • Draws only 20 milliamps of power
  • Great for underbody and indoor - outdoor use

Beautiful vivid colors never fade.

These lights stay cool to the touch and produce no heat.

Cool White

Blue Red Green Amber

 $5.99 Each

Choose Color

 

Choose Type

 


 12 Volt

Diamond Accent Indicator Light

  • 1" Diameter Crystal Glass Diamond
  • Fits thru 1/4" thru hole
  • 1/2" face nut
  • 3/8" back nut
  • Stainless steel
  • Waterproof
  • 20" wire leads can be extended to any length
  • Draws only 20 milliamps of power

(Important Installation Note: Built in-line resistors at front of wires must remain in place to avoid damage to the led.)

Beautiful vivid colors never fade.

These lights stay cool to the touch and produce no heat.

White Blue Red

  $5.99

Choose Color

 

Choose Type

 


Eagle Eye 3 Watt Accent Indicator Light

  • 12 Volt
  • 200 Lumens
  • Fits thru 1/4" thru hole
  • 1/2" face nut
  • 3/8" back nut
  • All Metal
  • Waterproof

Beautiful vivid colors never fade.

These lights stay cool to the touch and produce no heat.

3 Watt Luxeon LED Indicator Light
White Blue Red
Black Bezel Chrome Bezel

  $6.99 ea.

Choose LED Color

 

Choose Bezel Color

 


  12 Volt

Screw Accent Indicator Lights

  • Fits thru 1/4" thru hole
  • 3/8" back nut
  • Stainless steel
  • Waterproof
  • 20" wire leads can be extended to any length
  • Draws only 20 milliamps of power

(Important Installation Note: Built in-line resistors at front of wires must remain in place to avoid damage to the led.)

Beautiful vivid colors never fade.

These bulbs stay cool to the touch and produce no heat.

 

SMALL

7/16" Face Nut

5/8" long screw

Focused Led

LARGE

5/8" Face Nut

5/8" long screw

Focused Led

White Blue Red Green Amber UV

$4.99 Each

Choose Color

 

Choose Type

 

Want to make these bulbs ?

Want to switch these on and off with a remote control?

Click Here


Snake Light 6, 12 and 24 Volt LED Bulbs

Snake Light Led 3mm Bezel  Snake Light Led 5mm Bezel  Snake Light Led 10mm Bezel 
3mm With Plastic Bezel  5mm With Plastic Bezel   10mm With Plastic Bezel  
3mm 5mm 10mm Plastic Led Holder Bezel Clip Ring 

Plastic head snap fits into round hole for flush mount look - 18" Wire Leads

 Snaps into 3mm 3/16" diameter hole   Snaps into 6mm 1/4" diameter hole   Snaps into 13mm 1/2" diameter hole 
  $3.99 ea.  $4.99 ea.
Choose Color 
Choose Size and Voltage 

Choose Color 
Choose Size and Voltage 


Snake Light Led 3mm Chrome Bezel  Snake Light Led 5mm Chrome Bezel  Snake Light Led 10mm Chrome Bezel 
3mm With Chrome Metal Bezel  5mm With Chrome Metal Bezel   10mm With Chrome Plastic Bezel  
3mm 5mm 10mm Plastic Chrome Mounting Led Holder Bezel Clip Ring 

Head fits into round hole & is held with retaining Nut - 18" Wire Leads

Screws into 6mm (5/16") diameter hole
Internal 3mm / 0.12"
External 7mm / 0.28"
 
Screws into 8mm (5/16") diameter hole
Internal 5mm / 0.19"
External 10mm / 0.38"
 
Screws into 13mm (1/2") diameter hole 
Internal 10mm / 0.38"
External 16mm / 0.63"
 
  $4.99 ea.  $5.99 ea.
Choose Color 
Choose Size and Voltage

Choose Color 
Choose Size and Voltage


Snake Light Led 3mm Bezel Snake Light Led 3mm Chrome Bezel
Snake Light Led 3mm Bezel RGB Color Changing Snake Light Led 3mm Bezel RGB Color Changing
RGB Wild Psycho Color Changing

Wild Psychedelic Changes to 7 colors  automatically    

3mm With Plastic Metal Bezel  3mm With Chrome Metal Bezel  
  $4.99 ea.   $5.99 ea.
Choose Color 
Choose Size and Voltage

Choose Color 
Choose Size and Voltage


 Cree Eagle Eye  

5 Watt 4 Chip Super-High Powered LED Aluminum Billet Light

Fully Assemble and Tested With Heat Sink/ Lens & 24" wires for Direct Connection to any 6.5, 12 or 24 volt Power Source

Only 25mm diameter x 30 mm overall

Don't be fooled by imitations, these are not available anywhere else!

Spot Lens Led 5 watt cree Tail Light Bulb   5 watt cree Led Regulated 12 volt light assembly Astigmatic Wide Angle Lens Led 5 watt cree Tail Light Bulb
Spot - For Smaller Housings and Super Concentrated Beam  Astigmatic- For Larger Housings & Wider Beam 
  5 watt cree Led Regulated 12 volt light assembly 5 watt cree Led Regulated 12 volt light assembly Red 5 watt cree Led Regulated 12 volt light assembly Amber 5 watt cree Led Regulated 12 volt light assembly blue
Super White Red Amber Blue

$19.99 Ea.

Choose Color   

 

Choose Lens & Voltage    

 


 Plastic Sticky Back Stick On Safety Reflectors
Super-Thin Profile
 Red Stick On Safety Reflector  Amber Stick On Safety Reflector
  Stick On Safety Reflector
Red Amber
Peel off Sticky Back
Measures  2-1/8" Diameter x 1/4" Thick
$.99 Each

Choose Color  

Choose Type  

***Click Here to add a tracking number to your order***


Leds + Flashing Brake Light = Double Safety

Led Strobe Module

Read How LED Stop Lamps Reduce the Number & Severity of  Automobile Accidents

Read safety studies of flashing brake lights

Click Here to view a YouTube video

General Notes:

One module can connect to more than one led bulb, but each bulb must be connected to a module in order for that light to flash.  In most instances (to avoid running extra wiring) , it is easiest to install one module at each led light (ie: one module on each side of the vehicle).  If you have more than one brake light on each side of the vehicle, one module can  be used on each side (2 modules for four lights).

Important:  The FM-00 dual circuit module has the words "FLASHING CONTROL MODULE" molded into the black case.  The end closest to the word "FLASHING" must be toward the battery, and the word "MODULE" must be oriented closest to the led bulb.  If the module is installed backwards, it will not work.

**Operating Voltage: 6 - 13.5 volts

Maximum Current : 800ma

 

Note: These modules are not suited for filament style bulbs.  A filament style bulb is not capable of fast switching, and cannot strobe.  The power draw of the filament style bulb will destroy the Flashing Modules.

FLASHING LED CONTROL MODULES

The FM-00, FM-01 and FM-02 BRAKER CONTROL MODULES CAN MAKE YOUR led brake lights or reverse lights strobe brightly for a few seconds every time you hit the brakes or switch into reverse.

.........After a few seconds the lights stays bright as long as your foot is on the brake or the vehicle is in reverse.

The FM-01 and FM-02 BRAKER CONTROL MODULES CAN MAKE any led lights strobe continuously.

The FM-03 BRAKER CONTROL MODULES CAN MAKE YOUR led brake lights or reverse lights strobe brightly for a few seconds every time you hit the brakes or switch into reverse.

.........After a few seconds the lights stays bright as long as your foot is on the brake or the vehicle is in reverse.  The module will then strobe again for 2 seconds when the pedal is first released or when you switch out of reverse.

 *WORKS WITH ANY LED LIGHTS

WORKS GREAT FOR LED BRAKE LIGHT OR REVERSE LIGHT BULB

Works great for upper 3d brake lights too!

*Note: May not work with some vehicles that modulate voltage to a single circuit bulb for brake indication.  Also may not work in some vehicles if the circuit does not completely shut off power when the brake is released.

Led Strobe Module Led Strobe Module
Brake Lights Reverse Lights Continuous
10 Hz (10 flashes/sec)
Continuous
 20 Hz (20 flashes/sec)
Click on images above for larger view
Click Here to view a YouTube video
Click Here for Detailed Operation & Installation Instructions  
Dual Function:

White Wire: Strobes for 2 seconds When you First Brake or Switch into Reverse.
Blue Wire: Strobes Constantly
Single Function:

Strobes When you First Brake and Again When you Release the Brake
Dual Function:

White Wire: Strobes for 2 seconds When you First Brake or Switch into Reverse.
Blue Wire: Strobes Constantly
Single Function:

Red
Wire: Strobes for 2 seconds When you First Brake or first shift into reverse.
Single Function:

Blue
Wire: Strobes for 2 seconds When you First Brake or first shift into reverse.
Led Strobe Module Led Strobe Module Led Strobe Module Flashing LED Brake Light Module
FM-02A (10 Hz) FM-02B (20 Hz) FM-03A (10 Hz) FM-03B (20 Hz) FM-01A (10 Hz) FM-01B (20 Hz) FM-00 (20 Hz) Miniature Module FM-04 (20 Hz)
With Continuous or Intermittent Strobe Modes With Intermittent Strobe Mode on Brake and Release With Continuous or Intermittent Strobe Modes With Intermittent Strobe Mode on Brake With Intermittent Strobe Mode on Brake or Reverse

Universal Compact Two Function Strobe Module

Improved Design

Only 1-3/4" x 1-3/8" x 1"

New design has no battery to burn out

Universal Compact Strobe Module

Improved Design

Only 1-3/4" x 1-3/8" x 1"

New design has no battery to burn out

Universal Two Function Strobe Module

3-3/8"x 2"x 7/8"

New design has no battery to burn out

Dual Compact Circuit Braker Module

2"x 1"x 3/8"

New design has no battery to burn out

Dual Compact Circuit Braker Module

2-3/4"x 1-1/2"x 1"

$9.99 EA

$9.99 EA

$8.99 EA

$ 5.99 EA

$ 6.99 EA

Choose Color

 

Choose Speed

 

Choose Color

 

Choose Speed

 

Choose Color

 

Choose Speed

 

Choose Color

 

Choose Speed

 

Choose Color

 

Choose Speed

 

Uses: 

7507, 1156,3156, 7440, 921 single circuit bulbs & 7225, 1157, 3157, 7443 dual circuit bulbs, or use with any led light bulb or led fixture.  **Can be used in any 6 or 12 volt (-) ground or (+) ground systems.

 

Common Applications:

Brake light Warning Strobe
Reverse Light Warning Strobe

Make any led bulbs or lights strobe continuously.

Function:

The FM-02 module contains a chip that will cause an led light bulbs to operate as follows (Note: Use either the White wire or Blue wire not both):

 

Function 1 (If you use the White Wire)

1.  Each time power is applied to the red wire, from the battery, the white wire to the led bulb will cause the led bulb to perform a sequence as follows;

A.  The led will strobe brightly for a few seconds and then stop strobing.

B.  After a few seconds of strobing, the led light will light bright in a constant-on mode for as long as power is continually applied to the circuit (ie: as long as the brake pedal is pressed).

*C.  When power is cut to the brown wire (ie: the brake pedal is released, the bulb will go dim.  

 

*Note 1: In a singe circuit bulb such as an 1156 or 921, there is no dim circuit, so the module will sequence whenever the brake is applied, but there will be no dim function.

 

Function 2 (If you use the Blue Wire)

1.  Each time power is applied to the red wire, from the battery, the blue wire to the led bulb will cause the led bulb to strobe continuously until power to the red wire is off.

 

*Note 1: In a singe circuit bulb such as an 1156 or 921, there is no dim circuit, so the module will sequence whenever the brake is applied, but there will be no dim function.

 

**Note 2: This module can also be used in a positive ground 6 or 12 volt electrical system.

Uses: 

7507, 1156,3156, 7440, 921 single circuit bulbs & 7225, 1157, 3157, 7443 dual circuit bulbs, or use with any led light bulb or led fixture.  **Can be used in any 6 or 12 volt (-) ground or (+) ground systems

 

Common Applications:

Brake light Warning Strobe
Reverse Light Warning Strobe

 

The FM-03 module contains a chip that will cause an led light bulbs to operate as follows:

 

 

1.  Each time power is applied to the white wire, from the brake circuit,  the led bulb will perform a sequence as follows;

A.  The led will strobe brightly for a few seconds and then stop strobing.

B.  As long as power is still applied from the white-blue brake wire, the led light will light bright for as long as power is continually applied to the circuit (ie: as long as the brake pedal is pressed).

* B.  When power is cut to the white wire (ie: the brake pedal is released, the bulb will flash again for 2 seconds and then  go dim.

 

* Note: In a singe circuit bulb such as an 1156 or 921, there is no dim circuit, so the module will sequence whenever the brake is applied, but there will be no dim function.

 

**Note 2: This module can also be used in a positive ground 6 or 12 volt electrical system.

Uses: 

7507, 1156,3156, 7440, 921 single circuit bulbs & 7225, 1157, 3157, 7443 dual circuit bulbs, or use with any led light bulb or led fixture.  **Can be used in any 6 or 12 volt (-) ground or (+) ground systems,

 

Common Applications:

Brake light Warning Strobe
Reverse Light Warning Strobe

Make any Led bulbs or lights strobe continuously.

Function:

The FM-01 module contains a chip that will cause an led light bulbs to operate as follows (Note: Use either the White wire or Blue wire not both):

 

Function 1 (If you use the White Wire)

1.  Each time power is applied to the red wire, from the battery, the white wire to the led bulb will cause the led bulb to perform a sequence as follows;

A.  The led will strobe brightly for a few seconds and then stop strobing.

B.  After a few seconds of strobing, the led light will light bright in a constant-on mode for as long as power is continually applied to the circuit (ie: as long as the brake pedal is pressed).

*C.  When power is cut to the brown wire (ie: the brake pedal is released, the bulb will either go dim.

 

*Note 1: In a singe circuit bulb such as an 1156 or 921, there is no dim circuit, so the module will sequence whenever the brake is applied, but there will be no dim function.

 

Function 2 (If you use the Blue Wire)

1.  Each time power is applied to the red wire, from the battery, the blue wire to the led bulb will cause the led bulb to strobe continuously until power to the red wire is off.

 

*Note 1: In a singe circuit bulb such as an 1156 or 921, there is no dim circuit, so the module will sequence whenever the brake is applied, but there will be no dim function.

 

**Note 2: This module can also be used in a positive ground 6 or 12 volt electrical system.

 

Uses: 

7507, 1156,3156, 7440, 921 single circuit bulbs & 7225, 1157, 3157, 7443 dual circuit bulbs, or use with any led light bulb or led fixture.  **Can be used in any 12 volt (-) ground or (+) ground systems. Will not work in 6 volt systems.

Common Applications:

Brake light Warning Strobe
Reverse Light Warning Strobe

Function:

The FM-00 module contains a chip that will cause an led light bulb or any 12 volt led light to operate as follows:

 

1.  Each time power is applied to the brown wire, from the battery, the black wire to the led bulb will cause the led bulb to perform a sequence as follows;

A.  The led will strobe brightly for a few seconds and then stop strobing***.

B.  After a few seconds of strobing, the led light will light bright in a constant-on mode for as long as power is continually applied to the circuit (ie: as long as the brake pedal is pressed).

*C.  When power is cut to the brown wire (ie: the brake pedal is released, the bulb will go dim.

 

*Note 1: In a singe circuit bulb such as an 1156 or 921, there is no dim circuit, so the module will sequence whenever the brake is applied, but there will be no dim function.

 

**Note 2: This module can also be used in a positive ground 12 volt electrical system. 

*** Note 3:  The FM-00 has a built in circuit that will temporarily suspend the strobing effect if the brake pedal is pressed repeatedly.  The strobe chip sill only reset if the brake is released for about 5 seconds or more. 
Uses: 

7507, 1156,3156, 7440, 921 single circuit bulbs & 7225, 1157, 3157, 7443 dual circuit bulbs, or use with any led light bulb or led fixture.  **Can be used in any 6 or 12 volt (-) ground or (+) ground systems

Common Applications:

Brake light Warning Strobe
Reverse Light Warning Strobe

Function:

 

The FM-01 module contains a chip that will cause an led light bulb or any 6 or 12 volt led light to operate as follows:

 

1.  Each time power is applied to the brown wire, from the battery, the black wire to the led bulb will cause the led bulb to perform a sequence as follows;

A.  The led will strobe brightly for a few seconds and then stop strobing.

B.  After a few seconds of strobing, the led light will light bright in a constant-on mode for as long as power is continually applied to the circuit (ie: as long as the brake pedal is pressed).

*C.  When power is cut to the brown wire (ie: the brake pedal is released, the bulb will either go dim.

 

*Note 1: In a singe circuit bulb such as an 1156 or 921, there is no dim circuit, so the module will sequence whenever the brake is applied, but there will be no dim function.

 

**Note 2: This module can also be used in a positive ground 12 volt electrical system.  If you have a (+) positive ground volt system, The module must be installed inline in the (+) Ground wire and the blue wire must be installed toward the led light or bulb.  The brown wire must be installed toward the bulb.

Installation:

Install the module anywhere between the battery power and the led light that you wish to make flash.  Connect the wires as follows:

Connect the flashing module in the wires feeding to any led bulb as follows:

White Wire - Connect to the (+) side of any led light(s) that you want to strobe intermittently for the first 20 ms).

Red Wire - Connect to (+) Wire on the Power or Battery Side.

Black Wires - Splices into to the - ground wires on both sides.

Blue Wire - Connect to the (+) side of any led light(s) that you want to strobe continuously.

 

Note 1 :  You do not have to use both the white wires and the blue wires at the same time.  You can and normally would use one or the other.

 

****WARNING**** Never allow any of the bare wires connected to the module to touch together if power is connected to the module.  This can instantly and permanently damage the module. 

Installation:

Install the module anywhere between the battery power and the led light that you wish to make flash.  Connect the wires as follows:

Connect the flashing module in the wires feeding to any led bulb as follows:

* Blue Input Wire - Connect to the (+) battery power to power the module.

White Input Wire - Connect to (+) Brake Circuit.

Black Input Wire - Connect to the - ground wire.

Red Output Wire - Connect to the (+) side of any led light(s) or Bulb(s).

Black Output Wire - Connect to to the - ground wire going to the led light.

 

* Note:  You must connect the blue wire to a 12+ constant-on circuit.  This circuit must have + power on after the brake pedal is released of the light will not flash when the brake pedal is released. 

 

****WARNING**** Never allow any of the bare wires connected to the module to touch together if power is connected to the module.  This can instantly and permanently damage the module. 

 

Installation:

Install the module anywhere between the battery power and the led light that you wish to make flash.  Connect the wires as follows:

 

Connect the flashing module in the wires feeding to any led bulb as follows:

White Wire - Connect to the (+) side of any led light(s) that you want to strobe intermittently for the first 20 ms).

Red Wire - Connect to (+) Wire on the Power or Battery Side.

Black Wires - Splices into to the - ground wires on both sides.

Blue Wire - Connect to the (+) side of any led light(s) that you want to strobe continuously.

 

Note:  You do not have to use both the white wires and the blue wires at the same time.  You can and normally would use one or the other.

 

****WARNING**** Never allow any of the bare wires connected to the module to touch together if power is connected to the module.  This can instantly and permanently damage the module. 

Installation:

The FM-00 module can be used in conventional (-) ground systems and (+) ground 12 volt systems.  It will not work in 6 volt systems.

Install the module anywhere between the battery power and the led light that you wish to make flash.  Connect the wires as follows:

Connect the flashing module in the wires feeding to any led bulb as follows:

Important:  The dual circuit module has the words "FLASHING CONTROL MODULE" molded into the black case.  The end closest to the word "FLASHING" must be toward the battery, and the word "MODULE" must be oriented closest to the led bulb.  If the module is installed backwards, it will not work.

Power must flow thru the module and then to the led lights or bulbs that you want to make flash.

Red Wires - Connects to the (+) brake light wire.

Black Wires - Connects to the (-) ground wire.

 

****WARNING**** Never allow any of the bare wires connected to the module to touch together if power is connected to the module.  This can instantly and permanently damage the module. 

Installation {Conventional (-) ground system} :

Install the module anywhere between the battery power and the led light that you wish to make flash.  Connect the wires as follows:

Connect the brown wire to the wire coming from the (+) battery side of the circuit.

Connect the blue wire to the (+) wire going to the led light or light bulb.

Installation {Positive (+) ground system} :

Install the module anywhere between the battery power and the led light that you wish to make flash.  Connect the wires as follows:

Connect the blue  wire to the wire coming from the (+) battery side of the circuit.

Connect the brown wire to the (+) wire going to the led light or light bulb.

****WARNING**** Never allow any of the bare wires connected to the module to touch together if power is connected to the module.  This can instantly and permanently damage the module. 




Operating Voltage: 11.5 - 13.5 volts

Maximum Current : 800ma

Note: These modules are not suited for filament style bulbs.  A filament style bulb is not capable of fast switching, and cannot strobe.  The power draw of the filament style bulb will destroy the Braker Flashing Modules.


2 Circuit 12 Volt LED WIG WAG Safety Strobe Controller

Strobe rate is adjustable from 1 flash per second up to 3 flashes per second on each side.

Strobe sequence Wig WAG alternates (2 flashes left followed by 2 flashes right) between the right tube & left tube

With rubber grommet for installation in a 5/8" hole

For use with any led bulbs or led lights we sell

Turns any led bulbs or lights into an instant emergency flasher/ warning system

Click on images above  for larger view

Note: This truck is outfitted with our 3157 48 LED SMT Bulbs  

+ Led WIG-WAG Controller

Strobe Light

Manual On/Off Switch (Optional)

Connects to 12 volts

$19.99 With Manual Switch $17.99 No Switch


***Click Here to add a tracking number to your order***

Wireless Remote Control

on/off Switch

12 Volt DC Input

60 watt maximum output.

5 amp capacity.

26mm x 54mm x 26mm Deep

1" x 2" x1" Deep

12 Volt input.

12 Volt output.

Wires wireless transmitter

Capacity:
  • (50) 3led utility lights
  • (50) 8led utility lights
  • (30) 24led utility lights
  • (30) 13led utility lights
  • (30) LED Strobes
  • (30) Bright Strobes
  • (30) MR16 18led bulbs
  • (140) 9led festoon bulbs

$19.99 Each

Choose Color 

Choose Type 

LED Flasher Module

2 VDC Input

6 watt maximum output.

500 milliamp capacity.

Slow - 20-30 cylces per minute

Fast - 90-200 cycles per minute

75mm x 65mm x 30mm Deep

3" x 2-1/2" x1-1/8" Deep

12 Volt input.

12 Volt output.

2 screw mount

Capacity:
  • (5) 3led utility lights
  • (5) 8led utility lights
  • (3) 24led utility lights
  • (3) 13led utility lights
  • (3) LED Strobes
  • (3) Bright Strobes
  • (3) MR16 18led bulbs
  • (14) 9led festoon bulbs

$2.99 Each

Choose Color 

Choose Type 

Manual ON/OFF LED Switch Module (With Flash)

2 VDC Input

6 watt maximum output.

500 milliamp capacity.

Flashes at 90-200 cycles per minute

75mm x 65mm x 30mm Deep

3" x 2-1/2" x1-1/8" Deep

12 Volt input.

12 Volt output.

2 screw mount

Capacity:
  • (5) 3led utility lights
  • (5) 8led utility lights
  • (3) 24led utility lights
  • (3) 13led utility lights
  • (3) LED Strobes
  • (3) Bright Strobes
  • (3) MR16 18led bulbs
  • (14) 9led festoon bulbs

$3.99 Each

Choose Type 

Choose Type 

Manual ON/OFF LED Switch Module (No Flash)

2 VDC Input

6 watt maximum output.

500 milliamp capacity.

75mm x 65mm x 30mm Deep

3" x 2-1/2" x1-1/8" Deep

12 Volt input.

12 Volt output.

2 screw mount

Capacity:
  • (5) 3led utility lights
  • (5) 8led utility lights
  • (3) 24led utility lights
  • (3) 13led utility lights
  • (3) LED Strobes
  • (3) Bright Strobes
  • (3) MR16 18led bulbs
  • (14) 9led festoon bulbs

$2.99 Each

Choose Type 

Choose Type 

Strobe Light Manual Steel on/off Toggle Switch With wires & fuse

Thru Hole Screw Mount

$2.99 Each

Choose Color 

Choose Type 


Pigtail Bullet Style Connectors 12" wires (Click on Picture to Enlarge)

PL07-B PL07-W PL-08
1-contact straight male bullet connector - black wire 1-contact straight male bullet connector - white wire Male to female dual bullet splitter/extension
1 stripped end 1 stripped end Extends or splits any connection

$1.99 Each

Choose Color 

 

Choose Type  

 

***Click Here to add a tracking number to your order***


UPIC Shipping Insurance

Note: Our packages are not automatically insured against loss during shipping.  Insurance is the responsibility of the purchaser!
$2.00 for each $100 unit of insurance

Shipping Insurance

$2.00 per $100


Automotive Replacement  Bulbs: Other Products: Reference:
1156 1157 1142 2357 7507 7225 Bayonet Tail-Brake Turn Signal  Back Up LED Light Fixtures & Strobes Specs
3157 3156  3457 4157 3057 Wedge Tail-Brake-Turn Signal & Back-Up Bulbs Lights For the Home, Yard & Garden Cross Reference
7443 7440 Wedge Tail-Brake-Turn Signal & Back-Up Bulbs Electrical Contacts, Sockets, Connectors & Fuses Technical Data
194 168 2825 W5W Wedge Side Marker License Plate &  Interior Bulbs Light Bright NEON Glow Wire Bulb Dimensions
37 74 Gauge & Instrument Panel & Neo-Wedge  Bulbs High Powered Leds General Bulb Information
3022 3122 561 578 6418 6411 Festoon Dome Bulbs LED & Neon Light Tubes Application Charts
Ba9s, E10, Ba7s, Small Ba15s and Bay15d Bayonet Bulbs MR11 & MR16 Bulbs Bases & Filaments
906 921 Wedge Stop & Interior Bulbs LED Flashlights Work lights & Bulbs Shipping
Headlights & Foglights LED Screw Mount Indicator & Accent  Lights Mail Orders
HID Systems Track Lights International Shipping
LED Flashers, Protectors, Load Equalizers Turn Signal Fix LED Light Fixtures for the Home & RV FAQ'S
6 Volt Antique - Vintage Bulbs  & 24 volt Windshield Washer LEDS  
Marine Bulbs Electrical Wire  
  Dura Chrome Titanium Platinum Silver Vision Bulbs LED Bike, Go Ped, Motorcycle, ATV, Boat and RV Light Fixtures  
Xenon Plasma Super Hyper White Bulbs Miniature Train Bulbs & Parts  
G4 T10 2 Pin Bi- Pin Universal Programmable Remote Controllers & Switches for Garage Openers.  
  Semi, Truck & Truck Trailer Leds   Power Inverters  - Power Supplies  - Power Adapters  
  Overhead Lighting  - Trucks RV's and Under -Cabinets   Seat Covers  
      Custom Car Graphics & Decals - Brake Caliper - Engine - Alloy Wheels  
  Chrome Trim Products & Accessories    
  LVD Electromagnetic Induction Bulbs   dc

These Bulbs are Commonly Used in: Acura CL Integra Legend MDX NSX RL RSX SLX TL TSX Vigor Alfa Romeo Spider AMC Aston Martin Audi A3 A4 A6 A8 Allroad Cabriolet Q7 RS4 RS6 S4 S6 S8 TT Austin Austin Healey Bentley BMW 2002 3 Series 5 Series 6 Series 7 Series 8 Series M3 M5 M6 M Roadster & Coupe X3 X5 Z3 Z4 Z8 Buick Century Electra Grand National Lacrosse LeSabre Lucerne Park Avenue Rainier Reatta Regal Rendezvous Riviera Roadmaster Skylark Cadillac Allante Catera CTS DeVille Eldorado Escalade Fleetwood Seville SRX STS XLR Chevrolet Astro Avalanche Aveo Bel Air/150/210 Blazer C/K Pickup 1500 C/K Pickup 2500 C/K Pickup 3500 C-10 Camaro Caprice Cavalier Chevelle Cheyenne Cobalt Colorado Corsica Corvair Corvette El Camino Equinox Express G20 Van HHR Impala Lumina Malibu Monte Carlo Nova S-10 Silverado 1500 Silverado 2500 Silverado 3500 SSR Suburban Tahoe Tracker Trailblazer Uplander Venture Pickups Chrysler 300 Series Aspen Cirrus Concorde Crossfire Imperial LeBaron LHS New Yorker Newport Pacifica Prowler PT Cruiser Royal Sebring Town & Country Citroen Cord Daewoo Datsun Z-Series DeLorean DeSoto Dodge Avenger Caliber Caravan Challenger Charger Coronet Dakota Dart Durango Grand Caravan Intrepid Lancer Magnum Neon Nitro Power Wagon Ram 1500 Ram 2500 Ram 3500 Ram Van Shadow Sprinter Stealth Stratus Viper Pickups Eagle Edsel Ferrari 360 Fiat Ford Aerostar Aspire Bronco Bronco II Contour Crown Victoria Edge Escape Escort E-Series Van Excursion Expedition Explorer Explorer Sport Explorer Sport Trac F-100 F-150 F-250 F-350 Fairlane Fairmont Falcon Five Hundred Focus Ford GT Freestar FreeStyle Fusion Galaxie Model A Model T Mustang Probe Ranchero Ranger Taurus Tempo Thunderbird Torino Windstar Geo GMC Envoy Jimmy Safari Savana Sierra 1500 Sierra 2500 Sierra 3500 Sonoma Suburban Typhoon Yukon Honda Accord Civic CR-V CRX Del Sol Element Fit Insight Odyssey Passport Pilot Prelude Ridgeline S2000 Hummer H1 H2 H3 Hyundai Accent Azera Elantra Santa Fe Sonata Tiburon Tucson Infiniti FX G20 G35 I30 I35 J30 M Q45 QX4 QX56 International Harvester Scout Isuzu Amigo Rodeo Trooper VehiCROSS Jaguar E-Type S-Type XJ6 XJ8 XJR XJS XK8 X-Type Jeep Cherokee CJ Commander Commando Grand Cherokee Liberty Renegade Wagoneer Wrangler Kia Rio Sedona Sephia Sorento Spectra Sportage Lamborghini Lancia Land Rover Defender Discovery Freelander LR3 Range Rover Lexus ES GS GX IS LS LX RX SC Lincoln Aviator Continental LS Mark Series Navigator Town Car Zephyr & MKZ Lotus Elise Esprit Maserati Mazda 323 626 929 B-Series Pickups CX-7 Mazda3 Mazda5 Mazda6 Millenia MPV MX-3 MX-5 Miata MX-6 Protégé RX-7 RX-8 Tribute Mercedes Benz 190 Series 200 Series 300 Series 400 Series 500 Series 600 Series C Class CL Class CLK Class CLS Class E Class G Class M Class R Class S Class SL Class SLK Class SLR McLaren Mercury Capri Comet Cougar Grand Marquis Mariner Milan Montego Monterey Mountaineer Mystique Sable Tracer Villager MG MGA MGB Midget T-Series Mini Classic Mini Mini Cooper Mini Cooper S Mitsubishi 3000GT Diamante Eclipse Galant Lancer Mirage Montero Nash Nissan 200SX 240SX 280ZX 300ZX 350Z Altima Armada Frontier Maxima Murano Pathfinder Quest Sentra Stanza Titan Versa Xterra Oldsmobile 442 Alero Aurora Bravada Cutlass Eighty-Eight Intrigue Ninety-Eight 98 Silhouette Toronado Opel Packard Peugeot Plymouth Acclaim Barracuda Duster Fury Grand Voyager GTX Neon Prowler Road Runner Satellite Sundance Voyager Pontiac Bonneville Catalina Fiero Firebird G6 Grand Am Grand Prix GTO Le Mans Montana Solstice Sunbird Sunfire Tempest Trans Am Vibe Porsche 356 911 912 914 924 928 930 944 968 Boxster Cayenne Cayman Renault Rolls-Royce Saab 900 9000 9-2X 9-3 9-5 9-7x Saturn Ion L-Series S-Series Sky Vue Scion tC xA xB Shelby Studebaker Subaru Forester Impreza Legacy Outback SVX Tribeca Suzuki Toyota 4Runner Avalon Camry Celica Corolla FJ Cruiser Highlander Land Cruiser Matrix MR2 Paseo Previa Prius RAV4 Sequoia Sienna Solara Supra Tacoma Tercel Tundra Yaris Triumph Spitfire TR-6 Volkswagen Beetle (Pre-1998) Beetle - New (1998-Present) Bus Vanagon Cabrio EuroVan Golf Jetta Karmann Ghia Passat Phaeton Rabbit Thing Touareg Vanagon Volvo 240 740 850 940 C70 S40 S60 S70 S80 V40 V50 V70 XC Cross Country XC90 Willy s

Powered by Ewebmerchant.com

Quick-n-EZ Shopping Cart ®